Meinberg IMS-GNM181, Руководство по установке

Страница: 24 / 36

7 Configuration of GNSS Receiver
7.1.2 Time Zone
In this menu, you can configure the time zones (offsets) for the output signals (IRIG, serial interface, pro-
grammable pulses) of the reference clock.
The data of the time zone are used from the time zone table (see chapter ?? System
→
Display).
7.1.3 Enabling the Outputs
Optionally, the outputs of the reference clock can be set to always supply a signal when the device is switched
on, or only when the internal clock is running synchronously.
IMS-GNM181 Setup Guide Date: 25th February 2020 21