Meinberg IMS-GNM181, Руководство по установке

Страница: 22 / 36

7 Configuration of GNSS Receiver
7 Configuration of GNSS Receiver
This chapter explains how to put an IMS-GNSS receiver into operation via the web interface and also via the
front panel (if available).
7.1 Clock
On this page of the web interface, configurations can be made on the respective installed reference clocks or
the changeover card.
Depending on the design of the system, which means whether it is a single reference clock or a system with two
installed remote clocks and a changeover card, the web interface builds up accordingly. This also applies to the
type of reference clock and its options. In case of a redundant receiver configuration the common settings for
"IRIG In/Out", "Serial Ports", "Time Zone", "Enable Outputs", "Programmable Pulses" and "Synthesizers" appears
into the "Switch Card" menu.
Figure: Menu "Clock" in case of a single receiver
IMS-GNM181 Setup Guide Date: 25th February 2020 19