Meinberg IMS-FDM, Руководство по установке

Страница: 17 / 26

Only if receiver type "Custom" is selected
Prefix: Prefix of customized strings, control characters can be specified
by their hex value (ASCII), for example:
"\x01" for SOH (Start of Header) or "\x02" for SOT (Start of Text)
String: Customized time telegram, which can be composed of arbitrary text
and the following variables (identified by the prefix ’%’):
PLFRQ Power Line Frequency (i.e. 50.023)
FRQDEV Frequency Deviation (i.e. +00.023)
REFTIME Referenc Time (i.e. 15:17:23)
POWERLNTIME Power Line Time (i.e.. 15:17:22.550)
PLTDEV Power Line Time Deviation (i.e. -00.450)
IDX Intermediate Measurement Index (i.e. 1)
IMMFRQ1 Intermediate Measurement Frequency with Index 1 (i.e. 50.034)
IMMFRQ2 Intermediate Measurement Frequency with Index 2 (i.e. 50.034)
...
SEQID
Sequence ID (i.e. 0000000061)
SYSTIME System Time (i.e. 15:17:23)
SYNCSTATE Synchronization Status (’ ’ = synchronized, ’*’ = unsynchronized)
SYNCTEXT Synchronization Text („OK“ = synchronized, „NO“ = unsynchronized)
TIMESTAMP Current Timestamp (i.e. 2016-03-15 16:03:10.042)
TIMESTRING Time string to set the display time (i.e. S16:04:37;15.03.16S)
An auto-toggle feature allows to define a sequence of formats by setting up comma-
separated format strings. Additionally, the duration of a format string can be defined
using the FORMATSTR@DURATION format.
The following example will show the Powerline Frequency for 20 seconds, then the
Reference Time for 30 seconds, then the Frequency Deviation for 10 seconds. Afterwards,
it will start over with the PLF display:
PLF %PLFRQ Hz@20,REF %REFTIME@30,FDV %FRQDEV@10
Suffix: Suffix of customized strings, control characters can be specified
by their hex value (ASCII), for example:
"\x0A" for LF (Line Feed) or "\x0D" for CR (Carriage Return)
Append
Timestamps:
Indicates, whether a timestamp shall be appended to the message
14 Date: March 15, 2022 IMS-FDM Setup Guide