Page 20
S
ECTION
6 - T
ROUBLESHOOTING
6
T
ROUBLESHOOTING
If the dishwasher encounters a problem, an Info Code or Error Code will usually appear in the
display. If you use this troubleshooting guide to resolve simple problems, you can often return
the appliance to operation faster than by placing a service call.
Display Shows
Problem
Action
Tank is not heating OR
fresh water is not
entering unit
Check that the water hose is correctly
attached and is free of “kinks” or
pinching. Also check that the water
supply is turned on.
Door is not closed OR
door switch is defective
Check that the door is completely
closed.
Water leakage onto floor
pan
Check that the water line to the unit is
not leaking, and that the drain hose
empties correctly into the drain.
Correct water level was
not reached during initial
filling
Check that the water hose is correctly
attached and is free of “kinks” or
pinching. Also check that the water
supply is turned on.
Filling process takes too
long
Check that the water hose is correctly
attached and is free of “kinks” or
pinching. Also check that the water
supply is turned on.
Info Codes appear for minor difficulties. Error codes appear for more complex issues. After
correcting the condition, if the unit does not return to normal operation automatically, press
the START/DRAIN (
)key or the STOP/OFF (
O
) key to clear the message.
You should contact your
MEIKO Authorized Service Agent
IF:
• The dishwasher encounters a problem but does not display an
error code, OR
• An error code appears that is not shown here, OR
• The listed action fails to correct the problem.
An Authorized Service Agency Listing was supplied with your
dishwasher. If you do not have the listing, call 1-800-868-3840 for
assistance.
