Page 2
T
ABLE
OF
C
ONTENTS
3.12 Drain Hose Positioning ............................ 11
3.13 Final Assembly ........................................ 11
3.14 Priming the Liquid Detergent and
Rinse Additive Lines ................................ 12
3.15 Checking for Correct Chemical
Concentration .......................................... 12
4. OPERATION .......................................
13
4.1 Location and Description of Controls....... 13
4.2 Startup ..................................................... 14
4.3 Loading.................................................... 14
4.4 Operation................................................. 16
4.5 Between Cycles ....................................... 16
4.6 Shutdown ................................................ 16
5. CLEANING .........................................
17
5.1 Daily Cleaning (or as required) ................ 17
5.2 Weekly Cleaning (or as required) ............ 18
5.3 Exterior Cleaning (as required) ................ 19
5.4 Deliming (as required) ............................. 19
6. TROUBLESHOOTING ........................
20
1.
INTRODUCTION .................................
3
1.1 Overview of Equipment ............................. 3
1.2 General Safety Information........................ 3
2.
TRANSPORT AND SHIPPING ............
3
3.
INSTALLATION ....................................
4
3.1 Overview of Installation ............................. 4
3.2 Requirements Before Installation .............. 4
3.3 Uncrating, Positioning and Leveling ............. 5
3.4 Accessing the Utility Connections ............. 5
3.5 Main Electrical Supply Connection ............ 6
3.6 Dispensing System Overview .................... 7
3.7 Installing an External Detergent System ... 8
3.8 Installing an External Liquid Rinse
Aid System ................................................ 9
3.9 Wiring External Chemical
Dispensing Systems .................................. 9
3.10 Connecting Chemical Containers
or Dispensers .......................................... 10
3.11 Fresh Water Supply Connection .............. 11
Meiko reserves the right to change any specifications without notice at any time.
Meiko
• 917 Airpark Center Drive • Nashville, TN 37217
Phone: (615) 399-6600 • (800) 55-MEIKO • Fax: (615) 399-6620
www.meiko.us
THE MEIKO MODEL FV 250.2 HAS BEEN DESIGNED EXCLUSIVELY
FOR THE WASHING OF POTS, PANS, TRAYS, KITCHEN UTENSILS, CUTLERY,
DISHES AND GLASSWARE IN A COMMERCIAL OR INSTITUTIONAL SETTING
AND MUST NOT BE USED FOR ANY OTHER PURPOSE.
MEIKO ACCEPTS NO RESPONSIBILITY FOR DAMAGE TO THE APPLIANCE, SURROUNDING
EQUIPMENT OR ENVIRONMENT THAT IS CAUSED BY INAPPROPRIATE INSTALLATION OR
OPERATION, OR FROM ANY SERVICE THAT IS UNDERTAKEN BY NON-AUTHORIZED
PERSONNEL, OR FROM THE USE OF ANY PARTS EXCEPT THOSE THAT ARE APPROVED BY THE
MANUFACTURER. ANY SUCH INSTALLATION, USE OR SERVICE WILL IMMEDIATELY VOID THE
MANUFACTURER’S WARRANTY.
ANY MODIFICATIONS TO THE APPLIANCE THAT ARE PERFORMED WITHOUT THE WRITTEN
PERMISSION OF MEIKO WILL IMMEDIATELY VOID THE MANUFACTURER’S WARRANTY.
AN ELECTRICAL WIRING DIAGRAM IS LOCATED INSIDE THE
LOWER-FRONT COMPARTMENT OF THIS MACHINE.
