Meikai ENERGY
Page
5
Copyright
MeiKai
ENERGY 2012
REV 1.0
Installation and Operation Instructions
Important Safety Instructions
This manual contains important instructions for equipment installation and maintenance. For your own
safety, please follow the safety instructions during the installation and maintenance. Please pay
attention of the following safety symbols:
WARNING
：
This
indicates
a
situation
where
failure
to
follow
instructions
may
cause
personnel
danger
or
serious
hardware
failure
.
Use
extreme
caution
when
performing
this
task
.
NOTE:
This indicates information particularly important for optimal operation. Follow
these instructions closely.
Safety Information
WARNING:
the
Meikai
Micro
-
inverter
dissipates
heat
through
its
case
,
the
temperature
may
15 °
C
higher
than
ambient
temperature
. DO NOT
touch
the
device
surface
when
device
is
running
to
avoid
burns
.
Handle
the
device
with
caution
.
The installation of inverter must be performed in full compliance with the National Wiring Rules of
Standard AS/NZS 3000 and other relative local standards and regulations.
Be aware that only qualified personnel are allowed to maintain Meikai Micro-inverters.
DO NOT
attempt to repair the Meikai Micro-inverter, it is unrepairable. If it fails, please return
the unit to your distributor or Meikai Customer Service for maintenance. Tampering with or
opening the Meikai Micro-inverter will void the warranty.
Before installing and operating Meikai Micro-inverter, please read all instructions for the
inverter and the module. Be aware of the
WARNING
s appear in the technical description.
Connect the Meikai Micro-inverter to the local electricity utility grid only after receiving prior
approval from the utility company. Meikai takes none responsibility for any on-grid system
without such approval.
DO NOT
disconnect the PV module from the Meikai Micro-inverter without disconnecting AC
power.