manualshive.com logo in svg

Meiji Techno MC Series, Инструкция по эксплуатации

Поделиться
Скачать
Meiji Techno MC Series Скачать руководство пользователя страница 4

 
 
 

1.2 General Safety Guidelines 

 
Meiji Techno products are designed for safe operation under normal operating conditions. 
The instrument and accessories described in this manual have been built and tested 
according to industry safety standards for electronic laboratory instruments. Incorrect 
usage or non-conformance to operating instructions can cause personal injury or damage 
to equipment or property.  Keep this manual near your instrument for easy reference.

 

 
1.3 Intended Product Use 

 

Product Disclaimer:

 This product is designed and intended for use only as a 

metallurgical microscope system. Modifying this instrument in any way for use in any 
situation other than the original and intended product design will automatically void the 
warranty. In no event shall Meiji Techno be liable to any person or entity for any 
incidental, indirect or consequential damages, arising out of or in connection with the use 
or performance of a modified or altered product.

 

 
1.4 Product Safety Information- Handling the Microscope

 

        

 

 

 

     

 

 

 
DO NOT OPERATE THE ILLUMINATOR UNLESS THE UNIT IS PROPERLY 
GROUNDED!

  

 
Use only the specified power cord in a well grounded socket. Do not use in an 
ungrounded power receptacle or in cases where there is a break in the ground conductor 
or damage to the electrical wiring. 

 

Only fuses of the specified type and rating are to be used as replacements. Switch off the 
power and disconnect the power cord before replacing fuses. Use of a non-compliant fuse 
may result in electrical shock or severe damage your equipment. Do not replace the bulb 
for at least 10 minutes after the unit has been turned off or injury may result.  
 

 
 
 
 

Содержание MC Series






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды