7
ANT-TIP SAFETY KIT INSTALLATION
A.
Secure one bracket (H2) to an inside rear surface of the mantel with two 5/8” screws (H3).
Tighten the screws with a Phillips screwdriver. DO NOT over-tighten.
B.
Position the mantel in the
desired location and mark the wall where the second bracket will be mounted.
A.
Secure the second bracket (H2) with two 1-3/8” screws (H4). Screw directly into the wall studs. [If
no studs are available, drill two holes and tap the anchors (H1) into the holes. Then screw the two
screws through the bracket into the anchors.]
B.
Tighten all screws with a Phillips screwdriver. DO
NOT over-tighten.
C.
Loop the cable tie (H5) through the two brackets and lock the ends together.
Tug on the cable tie and brackets to make sure they are secure.
WARNING!
This cable
may reduce possible
risk of injury
if the fireplace is improperly
handled. But
, it is not a substitue for
proper adult supervision
.
WARNING!
This anti-tip safety kit is
only a deterrent
. It is not a substitute for proper
adult supervision.
NEVER leave children unattended near this product!
Mantel
H3
H2
Mark the
wall
H3
H3 H3
H5
H5
H2
H2
H4
H4
H1
H1
Meijer.com
