Bale grab Rambo 3 - EN
5
2. Technical specifications
Rambo 3
Height
cm
100
Width
cm
290
Weight
kg
785
Volume hydraulic circuit
litres
4
Max. number of bales
3
Max. weight bale
kg
500
Dimensions bales (lxwxh)
cm
240x120x70-90
Max. pressure hydraulic circuit bar
180 bar
When using a vehicle with a pressure higher than 180 bar, it is strongly
recommended to use a pressure relief valve.
This is available at Meijer Holland or at your supplier.
CE-marking
This machine is certified with the CE-marking. This means that the machine meets the
requirements of the applicable EC directives on safety and health. These directives are
specified in the attached declaration of conformity.
The non-observance of the rules and instructions stated in this manual is to be
considered as serious negligence which leads to the extinguishment of any
liability on the part of Meijer Holland concerning the resulting consequences. In
this case, the risk lies exclusively with the user.
Meijer Holland is constantly busy with the improvement of its products. Therefore
it also reserves the right to make any changes that are considered necessary.
There is no obligation to apply these changes to earlier delivered machines.
