Bale grab Rambo 3 - EN
4
1. Introduction
The bale grab Rambo 3 has a fixed frame
1
and is designed to be attached to a telescopic
handler, front loader, wheel loader or forklift (hereinafter referred to as ‘vehicle’) in order to
grab and transport straw or hay bales over a short distance. The bale grab is equipped with a
hydraulic circuit that is to be connected to the hydraulic system of the vehicle.
It is important to read the manual carefully before using the machine. There could
be a risk of serious injury or damage to the environment if the bale grab is not used
properly. Moreover, damages to the material or to the machine might occur. It is
therefore important to follow the instructions of this manual.
1
There is also a standard Rambo available with a hinged frame: the Rambo 6K.
