POWER
POWER
0FF0
10EF
12ED
13EC
04FB
05FA
06F9
0DF2
10EF
00FF
1BE4
18E7
1FE0
1AE5
17E8
16E9
1CE3
Output- 1
Input-1
Input-2
Input-3
Input-4
Input-1
Input-2
Input-3
Input-4
Input-1
Input-2
Input-3
Input-4
Input-1
Input-2
Input-3
Input-4
4x4 VGA MATRIX SWITCHER
4x4 VGA MATRIX SWITCHER
SW-4144
SW-4144
PAGE 6
SB-4144 INSTRUCTION & OPERATION MANUAL
Before making any connections to the
. Observe the following:
SB-4144
> Ensure the mains voltage supply matches the label on the supplied plug-
Pack (+/- 10%)
> Ensure that the power switch is OFF
> Ensure that all system grounds (earth) are connected to a common point.
> Avoid powering equipment within a system from multiple power sources
that may be separated by large distance
REMOTE CONTROL
REMOTE CONTROL
> Connect all audio
VGA
sources and destination equipment
> power up all source and destination audio-
VGA
sources
> For each destination output select the appropriate input source by using
> Upon power up the switcher will return to its last used setting before
The front panel input 1~4 select buttons. The supplied IR remote control.
Or through the RS 232 serial communications port.
Powered down.
1
SWITCH POWER ON or OFF
1
Controller with a separate power ON and OFF
OUTPUT 1~4 DISPLAYS SELECTION
2
2
INPUT 1~4 SOURCES SETUP
Output - : Switch 4x VGA sources to # 1 Monitor Display
1
CONNECTING THE HARDWARE
Please study the panel drawings below and become familiar with the signal input-output, Power requirements plus any controls
present.
Before using the switcher, please take the time to make certain that the device you wish to connect to its inputs is functioning
properly in all respects. Verify that the
VGA
and audio signals are present and are being displayed properly on a suitable device.
If all is well connect the appropriate cables between the output of the device you wish to distribute to output(s) of the switcher to
the carious devices you wish to feed a signal to. Lastly, connect the AC to DC adaptor, connect the DC connector to the switcher
first and then plug the adaptor into a functional AC outlet.
Output -
: Switch 4x VGA sources to # 2 Monitor Display
2
Output -
: Switch 4x VGA sources to # 3 Monitor Display
3
Output - : Switch 4x VGA sources to # 4 Monitor Display
4
Input -1 : VGA+Audio Signal source device # 1
Input -2 : VGA+Audio Signal source device # 2
Input -3 : VGA+Audio Signal source device # 3
Input -4 : VGA+Audio Signal source device # 4
Meicheng
