MEI TRC 6000, Руководство по обслуживанию

Страница: 15 / 21

Maintenance
4) Set the changer option switches as follows (if
applicable for your model coin changer):
ON U.S./ Canadian Acceptance
OFF High 25¢ Sensor
ON $ Coin Acceptance
ON $ Coin Acceptance w/o 25¢
5) Short the set of tuning pins by touching both
simultaneously with the tip of a metal screwdriver/
tuning plug; MEI P/N 208240001 PAK 5. (See Figure
12 or Figure 13 on this page).
6) With the screwdriver/tuning plug still touching the
tuning pins, turn machine ON.
7) Remove the screwdriver/tuning plug when the
"normal" message appears on the display of the
machine.
8) Press the Acceptor/Gate Assembly back into position
until the spring clips engage.
The changer is now in the tuning mode. Now you are
ready to follow the Tuning Coin Sets.
Follow TUNING COIN SET listed below.
Tuning Coin Sets
Coin Set Status
Insert a US nickel Rejected
Insert a Canadian nickel Rejected (see Note 1)
Insert a US dime Rejected
Insert a Canadian dime Rejected (see Note 1)
Insert a US quarter Rejected (see Note 1)
Insert a Canadian quarter Rejected (see Note 1)
Insert a US dollar coin Rejected (see Note 1)
Insert a Canadian dollar coin Rejected (see Notes 1 & 2)
Insert first token
(see Notes 2 & 3)
Insert second token (see Notes 2 & 3)
Notes:
1) To skip the tuning of the coin depress the Coin Return
Lever.
2) Nickel solenoid will fire once on TRC-6800, TRC-6510
or TRC-6512.
3) TRC651x using level 3 MDB applications recognize
token acceptance.
Figure 12: Shorting the Tuning Pins
TRC60X0, TRC6510, TRC6800
Figure 13: Shorting the Tuning Pins
TRC6512 Only
14
Tuning
Pins