MEI DH 5020, Инструкция по эксплуатации

Страница: 25 / 28

25
Do not remove any parts from the water tank or tank enclosure. The water full sensor will no longer be able to
detect the water level correctly and water may leak from the water tank.
2. CONTINUOUS DRAINAGE
Water can be automatically plumbed in or drained into a sink, a larger recipient or through the wall into an
outside drain by attaching a pipe to the unit (10 mm internal diameter). Insert the pipe into the drain outlet at
the back of the unit as shown here.
Make sure the connection between pipe and the drain outlet is tight and does not leak. Then direct the pipe
to a suitable drainage point.
NOTE: The pipe has 1m long.
This unit uses gravity to dispose of water hence the drain should be lower than the water outlet on the unit. Put
the tank back. Be sure to run the water pipe downward and let the water to flow out smoothly.
Do not kink or bend the pipe.
The permanent drain can be used in conjunction with a water pump (e.g. when draining from a cellar) to lift the
water upwards.
CARE AND MAINTENANCE
Always shut off the unit and unplug from the mains before cleaning or performing any maintenance. When it is
not in use for long periods it is advisable to remove the plug from the power socket.
Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage to
the unit.
Clean the grill and case

Use water and a mild detergent to clean the washable mesh filters. Do not use bleach or abrasives.
CAUTION: Do not splash water directly onto the main unit. Doing so may
cause an electrical shock and can lead to the insulation to deteriorate, or
cause the unit to rust.

The air intake and outlet grilles get soiled easily, so use a vacuum
attachment or soft brush to clean.

Wipe the dehumidifier body with a soft damp cloth or kitchen towel.