MEI DH 5020, Инструкция по эксплуатации

Страница: 23 / 28

23
When the unit is running in a room with a temperature between 5ºC and 12ºC, it will enter defrost mode roughly
every 30 minutes.
When the unit is running in a room with a temperature between 12ºC and 20ºC, it will enter the defrost mode
roughly every 45 minutes.
TANK FULL
When the water tank is full, removed or incorrectly inserted the unit will stop dehumidifying,
the red tank full light will illuminate and the unit will beep. Empty the tank and reinsert it
correctly to resume operation.
CARBON FILTER (Air purification function)
Remove the carbon filter from the bag and insert it on the filter housing. It is suggested to
hoover the carbon filter every 2-3 weeks and change it every 3-6 months as this will help to ensure the room is
kept fresh and odour free.
HUMIDITY LEVEL & TIMER 2 DIGIT DISPLAY
The led indicator performs the following functions:

When the unit is plugged in, it will indicate the humidity level of the room.

When the UP and DOWN buttons are pressed, it will indicate the desired humidity
currently set.

When the timer is programmed will show the duration.
Notes: When humidity level is outside the normal operational parameters will show LO/HI. If ambient humidity is
lower than 20%, it will show “LO” If ambient humidity is higher than 90%, it will show “HI”.
Your dehumidifier contains an advanced micro-CPU controlled device which is capable of self-diagnostics. The
LED display may also show the error and protections codes.
INSTALLATION

Remove any water from within the water tank before starting the unit.
WARNING: In order to save energy do not open windows or doors while the unit is running.

Place the unit on a hard / flat surface.

On first use run the unit continuously for 24 hrs.
To reduce noise levels
Place a piece of carpet or a rubber mat under the unit to reduce any vibrations while the unit is running.