Megmeet Dex CM3000, Руководство пользователя

Страница: 6 / 53

ventilation or use breathing apparatus; otherwise, the operator may get asphyxiated due to lack of oxygen.

Welding process will produce harmful fumes and gases. Therefore, please ensure adequate ventilation or use
breathing apparatus, otherwise, it will endanger your health.

Please do not weld pressure vessels such as pipes filled with gas or sealed tank.

Please do not keep thermal parts close to combustible materials.

Please do not weld around combustible materials.

Please put fire extinguishers around welding operation place.

Fix the gas cylinder with special brackets, otherwise the gas cylinder may topple over which will lead to
personal injury.

Please do not make the electrode contact the gas cylinder.

Please correctly use pressure-relief valve as required.

Disassembly and maintenance of pressure reducing valve should be performed by professionals.

Please do not contact the fan, wire feeding machine and other rotating parts, otherwise it may cause personal
injury.

While performing welding or supervising welding, please use protective equipment with sufficient shading
performance to prevent the arc from damaging eyes or skin.

Please use leather protective gloves for welding, long-sleeved clothes, welding spats, apron, glasses and other
protective equipment to prevent damage caused by arc, splash and welding slag etc.

Set protective barriers around the welding site to prevent the arc from hurting others.

Please use sound insulation instruments to prevent noise hazard.
ATTENTION
!

It is forbidden to use this welding machine on operations other than welding.

Please do not place heavy objects on the welder.

Please do not block the ventilation opening of welding machine.

Please place it in a place where spatter and other metal objects will not fall inside the welder.

Please keep the machine more than 30cm away from wall or other welders.

To prevent the wind from blowing the arc directly, please use a screen for shielding.

Please fix the wheels and avoid welding machine sliding.

In order to prevent electromagnetic hazard, perform electromagnetic shielding for cable and welding operation
site.

The inclination angle of welding machine installation plane should be less than 15°to prevent toppling of
machine.

Protection grade of welding machines IP23S. The operation environment requirements are as follows:

Operating temperature range: -10
℃～
+40
℃；
Transportation and storage temperature range:
－
40
℃～＋
70
℃
Operating humidity range: Not exc eed 75%RH at 40
℃
; not exceed 95%RH at 20
℃
.
Altitude shall not be higher than 2,000m.