www.megger.com
DLRO100E, 100X & 100H – 100A
4
Safety and hazard symbols used on the instrument
G
Caution: refer to user instructions
F
Caution: risk of electric shock
IP54
Enclosure is dust proof and protected against
water splashes
Equipment protected throughout by
Double Insulation.
Line Power / mains
600 V ~ MAX
600V ac rms maximum between terminals,
and between terminals and earth
Equipment complies with current EU directives.
N13117 Equipment complies with current
“C tick” requirements.
Do not dispose of in the normal
waste stream.
g
Connect to earth for Voltage
measurement reference
Universal Serial Bus (USB)
Bluetooth
®
Measurement Connection
■
Only Megger supplied test leads designed for this instrument provide the full safety rating.
Voltage
The rated measurement connection voltage is the maximum line to earth voltage at which it is safe to connect.
CAT IV
Measurement category IV: Equipment connected between the origin of the low-voltage mains supply and the distribution panel.
CAT III
Measurement category III: Equipment connected between the distribution panel and the electrical outlets.
CAT II
Measurement category II: Equipment connected between the electrical outlets and the user’s equipment.
■
Measurement equipment may be safely connected to circuits at the marked rating or lower. The connection rating is
that of the lowest rated component in the measurement circuit.
t
WEEE Directive
The crossed out wheeled bin symbol placed on Megger products is a reminder not to dispose of the product at the end of its life with
general waste.
Megger is registered in the UK as a Producer of Electrical and Electronic Equipment. The Registration No is WEE/HE0146QT.
For further information about disposal of the product consult your local Megger company or distributor or visit your local Megger
website.
