background image

MTO106

 

Transformer ohmmeter

 

NOTICE OF COPYRIGHT & PROPRIETARY RIGHTS 
© 2018, Megger Sweden AB. All rights reserved. 
The contents of this manual are the property of Megger Sweden AB. No part of this work may be reproduced or transmitted in any form or 
by any means, except as permitted in written license agreement with Megger Sweden AB. Megger Sweden AB has made every reasonable 
attempt to ensure the completeness and accuracy of this document. However, the information contained in this manual is subject to change 
without notice, and does not represent a commitment on the part of Megger Sweden AB. Any attached hardware schematics and technical 
descriptions, or software listings that disclose source code, are for informational purposes only.  Reproduction in whole or in part to create 
working hardware or software for other than Megger Sweden AB products is strictly prohibited, except as permitted by written license 
agreement with Megger Sweden AB.
TRADEMARK NOTICES 
Megger® and Programma® are trademarks registered in the U.S. and other countries. All other brand and product names mentioned in this 
document are trademarks or registered trademarks of their respective companies.
Megger Sweden AB is certified according to ISO 9001 and 14001

.

User’s Manual

 

 

BN034794AE 

ZP-BN01E

MTO106

3

www.calcert.com

[email protected]

1.888.610.7664

0

5

10

15

20

25

30

Содержание BN-19000

















Отзывы: