
Envoy 2 S Series User Guide 20191217-21.docx || © 2019 MegaVoice Ltd. || Page 43 of 51
Charging and communication modes
When connecting an Envoy 2 S Series player to a computer, it can be done in one of two modes:
charging or communication.
*Changing to computer communication mode is essential to allow programming of the player.
Connecting a player to a computer for programming purposes:
Connect the player to a computer using a micro-USB
or Standard micro-USB
. The
player will automatically enter computer communication mode*.
* While in computer communications mode, the player will be charging as well.
Connecting a player to a computer for charging purposes:
Connect the player to a computer using a micro-USB SLS cable, a Standard micro-USB Data cable or a
Charge Only micro-USB cable.
If connected via SLS/Data cable, and you want to disconnect from computer communication mode and
continue charging your player, press briefly on the Power button
at the top of the keypad or eject
the player’s volume via the operating system. If the player was on prior to connecting it to the
computer, the player will return to audio playback.
For the computer to recognize the player again, the player will need to be unplugged from the
computer, and reconnected.
Depending on the connection type, and the player’s battery level, the LED will blink (indicating
communication activity or charging).
Physically unplugging the player from the computer will stop the battery charging process.