SOLAR AUDIO PLAYER
Models: Elite/Z, Echo/Z, Equip/Z, Ember/Z
ENVOY 2
E/EZ SERIES
*Envoy 2 Elite Pictured
1
Press and hold the power button until
the light turns on. The player will start to
play automatically.
EASY START
2
4
1
3
2
TURNING THE
PLAYER ON/OFF
Press
in the middle of the keypad for
2 seconds to turn the player on (player
will beep once). Press
again for 2
seconds to turn the player off (player will
beep twice).
*The player will remember its last mode
when turned off.
**While the player is on, a click on
will perform a battery test. The LED will
blink rapidly for 2 seconds indicating the
remaining capacity (
Green
: 30-100%,
Yellow
: 10-29%,
Red
: 0-9%).
3
While playing one Language group,
a 2-second press will navigate to the
beginning of the next Language group.
If a microSD card is present, the player
will beep once and navigate to the first
Language group on the card.
*During playback mode the LED is
green
.
SELECTING A
LANGUAGE GROUP
Each Language group is subdivided into
one or more Sections, containing one or
more Books, containing one or more
Chapters.
NAVIGATING
DURING PLAYBACK
4
Click
to skip to the next Section
within the current Language.
Click
or
to jump backward or
forward one Book. A 2-second press will
skip 5 Books at a time. Press and hold
will continue until the button is released
or the beginning/end of the Section is
reached.
Click
or
to jump backward or
forward one Chapter. A 2-second press
will skip 5 Chapters at a time. Press and
hold will continue until the button is
released or the beginning/end of the
Book is reached.
Click
or
to jump backward or
forward 20 seconds* in the current file.
Press and hold will perform a fast
rewind/fast forward until the button is
5
released or the beginning/end of the file
is reached.
*Actual time may vary.
Envoy 2 E Series only
Use
to control the LED Torch and its
intensity. Each click will change the
intensity as follows:
Low > Medium > High > OFF
Press and hold
to turn on the Torch
in high intensity. The Torch will stay on
until the button is released.
*The Torch may be used while other
functions are active or player is off.
LED TORCH
6
RADIO
Envoy 2 Elite/Z & Equip/Z only
From any other mode, a 2-second press
on
will put the player in radio mode
(player will beep once).
*While in Radio mode the LED is
yellow
.
Click
or
to decrease/increase the
frequency by 0.1MHz. A 2-second press
will scan for the previous/next FM
station.
When scan reaches the beginning/end
of the FM frequency range (87.0 –
108.0MHz) the player will beep.
An additional click will loop and
continue the operation from the
beginning/end respectively.
The
buttons may be
7
pre-programmed with default
frequencies. A click on each will tune the
radio to the setting for that button. A
2-second press will re-program that
button to the current frequency.
RECORDING
Envoy 2 Elite/Z & Echo/Z only
From any other mode, a 2-second press
on
will put the player in recording
mode (player will beep once).
*While in Record mode the LED is
red
;
Player defaults to microSD card if present.
Once in recording mode, a click on
will begin recording with a single beep.
An additional click will stop recording,
beep once and save the recorded file.
While recording, a click on the
1/4
USER MANUAL