KE680
9
Delete Password Pin Code (Override Without Password Pin Code):
(Factory default setting)
1.
Turn the Ignition switch ‘ON/OFF’ 3 times and stay in the OFF position.
2. Push the Valet switch
8
times and hold it on the
8
th
push until
four
chirps with a long chirp is heard.
Then release the valet switch.
3. Within 15 seconds, press and hold the transmitter
button for 4 seconds. One long chirp to confirm
that the Password Pin Code has been deleted.
Example: To program the Password Code 92, you would:
1. Turn the Ignition switch ‘ON/OFF’ 3 times and stay in the OFF position.
2. Push the Valet switch
8
times and hold it on the
8
th
push until
four
chirps with a long chirp is heard.
Then release the valet switch. You are now in the Feature
‘IV’
programming mode.
3. Press and release the transmitter
button once, [2] LED flash, [2] siren/horn chirp to indicate you are
in feature “Password pin code programming mode”.
4. Within 15 seconds, press and release the valet switch 9 times.
5. Within 15 seconds of the last entered 10ths digit, turn the Ignition Switch to “ON” position.
6. Within 15 seconds press and release the valet switch 2 times.
7. Turn the Ignition Switch to the “OFF’ position.
You will note the LED flashing nine times, pause and then flash two times, pause. This pattern will be
repeated three times indicating the new code (92) has been accepted and stored in the memory.
Return To Factory Default Setting:
1. Turn the ignition ON then OFF 3 TIMES and stay in the OFF position.
2. Push the Valet switch
12
times and hold it on the
12
th
push until
six
chirps with a long chirp is heard.
Then rele
ase the valet switch. You are now in the “Return to Factory Default Setting” programming
mode.
3. Press the
and
or F
buttons at the same time on the transmitter together for 5 seconds, there
will be a confirmation six chirp with 3 long chirp to confirm the system Alarm Feature I & II & III & IV
Programming all returns to factory default setting.
