KE680
12
M. DOME LIGHT CONVENIENCE DELAY & SUPERVISION
The alarm has a unique feature that will turn on your vehicle dome light as following:
1. Upon disarming, the interior lights will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as the siren.
Note: Turning ON the ignition switch or arming the alarm will turn off the dome light.
N. IGNITION CONTROL POWER DOOR LOCK SAFETY SYSTEM.
(See Feature
II
– 3
Programming.).
1. Turn the ignition switch on a
nd close all the vehicle’s doors. After 3 seconds, the system will
automatically lock the central locking system.
2. Turn the ignition switch off. The system will automatically unlock the central locking system.
O. TRUNK RELEASE (Factory default setting) / CHANNEL 3 TIMER CONTROL
OUTPUT.
(See Alarm Feature
III
– 3
Programming.)
Press and hold
or F
button on transmitter for 2 seconds to control trunk release or other electric
devices.
Channel 3 is user-programmable timer output. You may program the built-in timer to send a ground signal
for any time interval between 1 second and 2 minutes. For instance, this timer output may be used to turn
on the headlights, power windows, or sunroof.
Note:
Factory default setting at 1-second pulse grounded for trunk release outpu
t.
P. CHANNEL 4 TIMER CONTROL OUTPUT
(See Alarm Feature
III- 4
Programming)
Press the transmitter
and
or F
buttons at the same time to active Channel 4 function. Channel 4
is user-programmable timer output. You may program the built-in timer to send a ground signal for any
time interval between 1 second and 2 minutes. For instance, this timer output may be used to turn on the
headlight, power windows, or sunroof.
Note:
Factory defaults setting at momentary output.
Q. POWER ON MEMONRY:
This system is equipped with circuitry that will allow the unit to remember its state if the power is lost and
then reconnected.
R. ALARM UPGRADE:
This unit is capable of being upgraded to an alarm system so as to detect if a thief is trying to open a door,
the hood, or the trunk and has an input for a shock sensor to detect impact to the vehicle by a thief. If you
would like to upgrade this unit to an alarm system, please contact your authorized reseller.
S. 2-WAY UPGRADE:
This unit is capable of 2-way communication to notify the owner if anyone is trying to tamper with the
vehicle or to confirm remote start operation. If you would like to upgrade this unit to a 2-way system by
purchasing a 2-way LCD transceiver, please contact your authorized reseller.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
