Your Tempest Gladiator
Features
Your new Tempest Gladiator features the high-
output M-16 Big Block Nitro race engine, capa-
ble of producing over one horsepower!
Polished aluminum high-performance tuned ex-
haust that lets the engine put out all that power
without conventional muffler power losses.
Race-tested slide carburetor features fully adjust-
able high end, mid-range, and idle settings.
Fully automatic 2-speed, adjustable transmission
with Delrin gears and 4WD shaft drive
Heavy Duty anodized aluminum chassis/radio
plate with sealed receiver and battery box
Adjustable oil filled coil-over shocks with pow-
der coated springs
All ball bearings
Fully adjustable front and rear sway bars
Fully adjustable suspension with turnbuckles to
set camber, ride height, steering and toe-in
Pistol grip 2 channel radio system
Best of all, the Tempest Gladiator comes fully factory
assembled and set up, with all components installed, tires
installed and glued, and the engine installed and adjusted
for break-in. The body is fully painted with decals in
place… You’re almost
Ready to Rumble
when you open
the box! (After engine break-in)
Tempest Gladiator Specifications
Length:
15.375” (390mm)
Width:
12.75” (325mm)
Height:
9” (227mm)
Weight:
55 oz. (1540g)
Drive:
Full 4 Wheel Drive
Transmission: 2 speed automatic
Engine:
.16 cu. in. M-16 Nitro
Radio:
Pistol Grip 2 Channel
Required Equipment
For the best performance and maximum enjoyment, your
Tempest Gladiator will require several additional items for
proper operation and adjustment. We highly recommend
purchasing Megatech’s Gas Car/Truck completer kit,
MTC 7500, which contains many of these items. The
items should be available through your local hobby shop.
The list of items you will need are:
+
12 new heavy duty AA size Alkaline batteries for
transmitter and receiver
+
Fuel for model car/truck engines (MTC 502 rec-
ommended)
+
Rechargeable glow plug igniter (MTC1160)
+
Spare glow plug
+
4-Way wrench (MTC 1200)
+
Small/medium Phillips & flat head screwdrivers
+
Small adjustable open end wrench or wrench set
+
Allen wrench set
Radio
Your Megatech Tempest Gladiator is equipped with a top
quality 2 channel pistol grip radio control unit. The com-
ponents are completely installed and set up at the factory.
Please see the transmitter photo for the location of the
controls, trim knobs and other features. The radio control
unit operates on either the 27 or 75 mhz band. Your radio
includes:
•
Transmitter (takes your steering and throttle con-
trol inputs, turns them into radio signals, then
sends the radio signals through the air to the
truck)
•
Receiver (takes the transmitter’s radio signals,
decodes them, and sends the proper electronic
commands to the truck’s servos)
•
Servos (which turn the Receiver’s electronic
commands into physical force that steer the
wheels or operate the slide carburetor)
•
On-Off Switch for Transmitter and Receiver
•
Battery Holders for Transmitter and Receiver
Tempest Gladiator 4
Megatech’s Gas Car/Truck Completer Kit,
# MTC 7500, contains many items you will
need to operate your Tempest Gladiator,
including fuel, glow plug igniter & charger,
radio batteries, multi-wrench, and spare
glow plug.
Содержание MTC 7805
Страница 14: ...Tempest Gladiator 14...