Megasat HD 760, Руководство пользователя

Страница: 14 / 19

08 09
ENGLISH ENGLISH
4. First installation 4. First installation
When the set-top box is turned on from
standby mode and no channel is stored
in the database, the following menu
window appears on the screen. It is as-
ked, among other things, according to
the menu language (OSD) and the land.
Select the „Preset List“ to load a preset list.
Leave the message window to exit. If you
want to manually search for programs,
select „Installation“.
Unicable:
When using a unicable system, the LNB type must be set to Unicable. Use the
t u
but-
tons to change the LNB type and select Unicable A. Then press the OK button to access
the configuration.
Motor:
Select this antenna type, if you use a motorized antenna. Configure the settings for the
engine settings according to your needs. The available options may vary depending on
the engine type. If you have made all the settings, press EXIT to return to the satellite
selection.
Search programms:
Press the BLUE button to search the
selected satellite for programs. Then,
a message box appears adapt your se-
arch. Usually used to find „Blind Scan“
to all programs. Go to „Encrypted“ if you
want to search only for free or encrypted
channels. Confirm with the OK button.
The search can take some time. The
course you will see at the bottom of the
screen.
You can select the desired satellite from
the left side of the menu. To start mul-
tiple search, you can select by pressing
the OK key to select multiple satellites.
Please set the correct parameters on the
right side of the menu for each satellite.
The signal quality is displayed after cor-
rect selection.
Lib: Show transponder list.
OK: Confirm selection.
Green: Edit the selected satellite.
Blue: Channel search for selected satellite.
Exit: Exit the bowl settings menu.
Red: Add a satellite.
Yellow: Delete the satellite from the satellite list.
Important:
Make sure that the antenna is connected before you turn on the set-
top box for initial installation.
Note:
You can press EXIT to cancel
or MENU to skip the installation.