Megasat Classic Line 19, Руководство пользователя

Страница: 39 / 92

09
ENGLISH
5. First installation
1. Connect the TV to the power supply and turn on the power switch at the bottom of
the housing. The TV is now in standby mode (LED is RED).
2. Then press the Power button on the
remote control (LED is GREEN).
3. After the TV is started, the First Ins-
tallation menu appears. You can now
make the following settings:
• Language: Select a language for the OSD. To modify, use the
t u
keys.
• Country: Select the country. To modify, use the
t u
keys.
• Home-state: Select the display attribute of the TV:
Home-mode = dynamic and high-contrast colors
Store Mode = neutral colors
• Enter button: Starts „Auto Tuning“ for Terrestrial, Cable or Satellite television.
Tuning Setup
Defaults for signal search
Reception mode: Use the
t u
keys to select the reception mode
ATV (analogue) and/or DTV (digital)
Digital Typ: Choose between Satellite, DVB-C or DVB-T
Once you have made all settings, start the channel search with Enter.
Note:
In satellite mode, you can load the preset channel list.
To do this, confirm the loading of the station list by pressing YES (left arrow). Press NO
(arrow key to the right) to perform a new search.
No further settings required.
Satellit:
Astra 19.2° Ost
Search mode:
Standard
Channels type:
Alle Kanäle
Service type:
Alles
DVB-S (Satellit) DVB-T (Terrestrial) DVB-C (Cable)
Scan Typ:
Full
Netzwerk ID:
Auto
Symbolrate:
Auto