3. Mounting options
4. Prepare and lay coaxial cable
3.4 Mounting on a window
12
13
Route the coaxial cable from the antenna to the satellite receiver. Make sure that
you do not damage the cable during installation or that there are no kinks. Do not
exceed the length of 30 meters, otherwise there may be signal loss. If you would
like to lay the cable through a window, please use a suitable window feedthrough.
Connection to the
receiver (LNB In)
Connection
at the LNB
When installing the F-connectors, make sure that they are installed correctly. Fai-
lure to correctly install the F connectors may result in signal loss or short circuit.
The weather protection is only necessary for the exterior of the antenna.
weather proof
F-connector
15 mm
8 mm
3 mm
Mount the
window holder A
to the
mounting arm
. Use two
screws
M6 x 10
for this purpose.
Mount the
window holder B
to the
mounting arm
. Use two
screws
M6 x 10
for this purpose.
Hang the antenna with the
window
holder A
in the fold of the window. The
window holder B
serves as a support.
You can adjust the distance from the
window to the outside wall with the two
f
ixing screws M6 x 10
on the
window
holder A
. The
mounting arm
should
generally be mounted horizontally.
1
2
3