MEGAPOWER ML130, Руководство пользователя

Страница: 9 / 21

2.1 Setting Up
1.
Slide the battery door open & plug the battery connector to
the Pico projector, as indicated by the following sequence
of photos. The battery compartment was designed to
accommodate different batteries, and as sizes can vary EVA
foam is used to hold the battery in place.
2. Connect the battery, as indicated by the above sequence of
photos. Ensure the battery does not obstruct the cooling
fan.
3.
The battery needs to be charged for approx 8 hours the
first time it is used. Plug the Power Adaptor to the DLP
Pico Projector.
4.
Slide the On/Off side button and hold for approx one second
or until the red light appears, then release to start the
DLP Pico Projector. The Projector will take about 10
seconds to initialize. Thereafter, the Windows CE Screen
5
On/Off Power Button
Volume Button Source Button
Micro SD Card connector