MEGAPOWER ML130, Руководство пользователя

Страница: 10 / 21

will be projected.
5. Place the Projector at a suitable distance so the image
size is around 20” to 40” diagonal
6. Turn the Focus Knob to bring the image into focus.
7. Navigate the Mouse Cursor with the built-in Mouse Touch Pad
to operate the projector using the internal Windows CE
system.
8.
External signal source can also be played through the
projector using the AV and VGA cables supplied. Bring up
the SOURCE SELECT window and tap on VGA or CVBS(composite
video). To change the input source, push the “Source”
button to cycle through the different connections (note :
selecting a source without the required electrical signal
connection will result in a blank or random image being
projected)
9. The default brightness is Standard Brightness. Lower
Brightness to extend battery life or Enhanced Brightness to
suit the presentation environment can be selected on the
MODE SELECT Window.
Caution:
Always use the power adaptor that was shipped with the
Pico Projector. The adaptor accepts power 100-240V 50-
60 Hz. Check to ensure that the main voltage is within
the range on the rating plate on the rear of the
projector. When disconnecting the Pico Projector,
always remove the power adaptor from the power source
first, then from the Pico Projector
2.2 Connector Panel
This illustration shows the connector panel on your DLP Pico
Projector. Refer to this figure when connecting the DLP Pico
Projector.
6