22225555
e.
Wireless.
Please note, wireless network feature is available only to selected models, and is based on IEEE 802.11
b/g protocols.
Following steps will guide you through setup procedures for wireless connection:
1.
Connect IP Camera directly to PC with cross-over network cable provided in the package.
2.
Use IP Manager to detect IP Camera.
Modify IP information that is identical with parameters set in
wireless Router.
Finally click [Submit] to apply changes and reboot IP Camera.
3.
Use IP Manager to detect IP Camera and then launch IP Viewer in standard Internet browser.
4.
Enter [System Configuration] then click [Wireless], and following setup window will be shown:
5.
Available Wireless Networks.
IP Camera will display all wireless Routers it detected in this table. Make sure your wireless Router is
detected and listed.
6.
Setup.
Please make sure all data are identical between IP Camera and wireless Router.
Wireless MAC.
This is MAC address for wireless module and is
NOT
for Ethernet module.
Mode.
Infrastructure Mode
is for connecting with Router and
Ad-Hoc Mode
is for connecting with PC.
Operation
Mode
.
.
.
.
Selections
for
IEEE 802
.
11
b
or
g
. If you are not sure, please select
Auto
.
SSID.
This refers to
network ID
of IP Camera. It can be the name of IP Camera or can be different, as
long as it is
identical with SSID registered in wireless Router
.
Channel.
This setting is available only under
Ad-Hoc mode
. Channel refers to channel number on wire-
less device, and it must be identical among IP Camera, PC, and wireless Router.
VI. SYSTEM CONFIGURATION
