8
MEG18
Max. capacity
40/20 tons
Working pressure
8-12 bar
Min. height
210 mm
Lifting height
40 tn: 102 mm
20 tn: 90 mm
Extension pieces
75 mm + 45 mm
Rated pressure
320 bar
Net weight
56 kg
SAFETY INSTRUCTIONS AND WARNINGS
-
Read and understand all warnings and instructions before use.
-
Extreme caution should be followed when working with this or any other hydraulic unit.
-
Follow the jack’s rated capacity. Do not overload the jack. Overloading may result in jack failure, serious
injury and/or property damages.
-
Inspect the jack before each use.
-
Center the load on the saddle before lifting.
-
Lift only on areas of the vehicle as specified by the vehicle manufacturer.
-
Never move the jack while it is supporting a load.
-
Do not modify the jack’s structure or operation in any way. All modifications are strictly forbidden.
-
Some vehicles require an adapter to properly engage the frame for lifting. Follow vehicle manufacturer’s
instructions on proper lifting.
-
Failure to follow these warnings or instructions may result in personal injury and/or property damage.
WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all pos-
sible conditions and situations that may occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into any product, but must be supplied by the operator.
1. This jack is designed only for lifting, not for supporting a load. Additional extra stands, for example jack
stands, must be used with this jack. Support the vehicle with extra stands immediately after lifting. Do not
get under the vehicle until it has been supported by jack stands.
2. The jack must only be used on hard surfaces which are capable of sustaining the load. It must not be used
on inclined or uneven surfaces to avoid the load from moving. Before lifting the vehicle, ensure that anti-
slip blocks for the wheels are in place.
