Megamoto MM-B212 MXS, Руководство по сборке

Страница: 16 / 21

MM-B212MX (MEGA MAX) ASSEMBLY INSTRUCTIONS
28
29
28) Cut the 2 steel ties that secure
the rear of the minibike to the
lower steel shipping crate. Tilt the
minibike slightly to the left, as
viewed sitting on the bike, or left
as pictured and turn the handlebar
clockwise all the way. The
handlebar grip should be higher
than the brake master cylinder.
PURGE AIR FROM BRAKE LINE
DURING SHIPPING SOME AIR MAY HAVE ENTERED THE BRAKE HOSE. THIS PROCEDURE WILL PURGE AIR FROM THE HOSE
AND ENSURE PROPER BRAKE PERFORMANCE.
BRAKE MASTER
CYLINDER
29) Gently pull the brake lever
toward the handle, DO NOT PULL
THE LEVER ALL THE WAY TO THE
HANDLEBAR. Pull the lever only
about ½ inch. Remove the small
black plastic wedge placed between
the lever and the master cylinder
30) Release the lever then pull it
to the handle bar again, only
about ½ inch. Repeat this process
several times. Then pull the lever
slowly toward the grip as far as it
will go. The lever should offer
resistance the more it is pulled
toward the grip and should not
be able to be pulled all the way
to the grip. Repeat 38 and 39
until the brake lever offers firm
resistance and will not pull all the
way to the grip.
30
Remove the small black plastic wedge
from the lever.