How to use your BakerBox
TM
on your gas grill.
1. Open the main lid of the gas grill that will be used with the BakerBox
TM
.
2. Place the BakerBox
TM
on the cooking grid, centered above 3 burners (for 4 burner or larger
units, center BakerBox
TM
on any 4 burners. Leave at least 15mm of space between the
front edge of the BakerBox
TM
and the front edge of the grill firebox. There should also be at
least 26mm of clearance between the BakerBox
TM
sides and the sides of the grill firebox.
3. With the gas grill main lid completely open and proper spaces surrounding the BakerBox
TM
listed in Step 2, light your grill by following the instructions that come with your gas grill.
4. Set all burners to HIGH and preheat the BakerBox for approx. 15 minutes.
5.
Once the temperature crosses into the designated cooking zone (see Troubleshooting
Instructions if this doesn’t occur), place your uncooked pizza or other selected food in the
oven for baking. Use a dusting of flour on the pizza stone to ensure the pizza base does
not stick and to minimise the risk of overcooking the base.
6. Rotate the food as necessary to for even cooking.
Warning: Please read the following instructions carefully before attempt to
assemble, operate or install the product. The BakerBox becomes extremely hot and
can cause burning. Failure to comply with these instructions may result in serious
bodily injury. Always wear heat resistant oven mitts or gloves for outdoor cooking
when handling the BakerBox
TM
.
Fits a 57cm Kettle Charcoal Grill?
Yes
Fits into a 50cm+ Gas Grill?
Yes
Accepts a 22cm Pizza?
Yes
Accepts a 30cm Pizza?
Yes
22cm Pizza Average Cook Time?
5 min.
30cm Pizza Average Cook Time?
8 min.
Assembly Time?
10 min.
Note: Remove all packaging, including straps, before using the BakerBox
TM
.
Gas Grill Operating Instructions
Fitment and Time Guide
(Times may vary by grill size)
10
