Megaman lightwaverf JSJSLW921, Инструкция по эксплуатации, Страница: 17 / 26

Heating System Setup
Linking to Multiple Radiators in one ‘heating zone’ (room)
If you have a large room or area with more than one radiator, you may want
to link the TRVs (or Electric Radiator Switches) to become part of the same
‘heating zone’ on the App and work together. You can do this simply by
linking one Switch to Lightwave Link and App and then linking it to the next
Switch to form a ‘daisy-chain’.
You can also link a Room or Home Thermostat to the App, then to a Switch,
and, finally, link the Switches together. The Thermostat will take commands
from the App and relay them to the linked Switches in its ‘heating zone’.
In some cases, you may also want to link a Heating Remote or Magnetic
Trigger to more than one TRV / Electric Switch in the same room or ‘heating
zone’. This will cause all radiators to be controlled by the same device. This
can be achieved in the same way: link one TRV to the Remote or Trigger, and
then link that TRV to the next. A single Heating Remote or Magnetic Trigger
can also be linked to multiple TRVs by linking it to a Thermostat that, in turn,
controls the TRVs or Electric Switches in that room.
IMPORTANT: LightwaveRF Thermostats can link to a limited number of
heating devices. If this limit is exceeded and an extra device linked, the link to
the former device will be overwritten. More devices can be added by linking
them to the Lightwave Link and App. It is always recommended to use the
Lightwave Link if anything more than a basic setup is desired.