Display Menu
6
The control board on the fixture base is your interface to access and
control all the functions on the unit. Its digital display gives you a code
view of the options and functions. The following will explain each func-
tion and its options.
ESC
DOWN
UP
ENTER
CONTROL BOARD
Address
001
Work Mod
DMX 512
DMX 512=
This mode will allow you to operate the fixture with a DMX controller
Master=
This Function Allows you to run the Auto Programs Or Audio Programs
and send DMX signal out to the Slave units
Slave=
On Slave Mode the fixture will copy the functions on the Master unit
To Set the Desired operational mode press
Enter.
Use the
Down or Up
to se-
lect the desired mode and press
Enter
to confirm your setting.
—
Mega Lite
—
XBAR LED
To Set the DMX Start Channel
press
Enter.
Use the
Down or Up
to select the
desired DMX Start Channel and press
Enter
to confirm your setting.
(Note: (S) Will flash indicating there is DMX signal present)
Chan Mod
ACH
To set the desired operational channel mode press
Enter.
Use the
Down or Up
to select the desired DMX profile operational mode from A,B,C,D and E press
Enter
to confirm your setting.
Note: Operational mode are located on Page 8 of the manual.
Auto
This function will give you access to the Preprogramed Chases Press
Enter.
Use the
Down or Up
to select the programed chase, press
Enter
to confirm your
setting. Use the
Down or Up
to select the desired speed of the Chase from 1 to
5 press
Enter
to confirm your setting
RED
000
Color
Set
This function will give you access to set Intensity of each color via display. Press
Enter.
Use the
Down or Up
to select the desired intensity. Press
Enter
use the
Down or Up
to select intensity from 0 to 255. You can repeat this process to
get any color combination.
(Note) once intensity is set you can power up and the last Intensity setting will
automatically come on.
Green
000
Blue
000
Содержание XBAR
Страница 2: ......
