MegaLite TUFFBABYVW-42, Руководство пользователя

Страница: 5 / 10

5
Main Power Connection
Caution!
1. Do not connect fixture to a dimmer system.
2. This unit has Auto switching power supply. It will respond to 110V or 220V automatically
3. This unit must be earthed. (electronically grounded)
4. Replace fuse only with the specified type and rating.
The occupation of the connection - cable is as follows:
DMX - 512 Connection
This fixture is equipped with an electronic power supply that will let the unit operate from 90V to 240V from 50Hz to
The fixture is equipped with 3 pin XLR Sockets for DMX input and output. The sockets are wired in parallel. Only use a
shielded twisted pair cable designed for RS - 485 and 3 pin outdoor XLR plugs and connectors in order to connect the
controller with the fixture or the fixture with another.
Caution!
At the last fixture the DMX signal needs to be terminated with a terminator. Solder a
120 Ohm resistor between the ( - ) and the (+) signal into a 3 pin XLR plug and plug it
in to the last fixture on the signal run. Pre - manufactured terminator plugs are availa-
Cable (USA) Cable (EU) Pin 110V
Black Brown
White
Green
Light Blue
Yellow/Green
Live
Neutral
Ground
L
N
220V
L
L
110V
Connection
220V
Connection
1 2
3
2
3
1
DMX—input
DMX—output
1. Shield
2. Signal ( - )
3. Signal (+)
L N
L L