5
Caution!
1.
Do not connect fixture to a dimmer system.
2.
This unit has Auto switching power supply. It will respond to 110V or 220V automatically
3.
This unit must be earthed. (electronically grounded)
4.
Replace fuse only with the specified type and rating.
Unit is equipped with cable mounted Neutrik Power
Connections Female NAC3FX-W & Male NAC3MX-W:
Unit also ships with a Male Nema 5-15 to Female
NAC3FX-W adaptor:
DMX-512 Connection
This fixture is equipped with an electronic power supply that will let the unit operate from 100V to 240V from 50Hz to 60Hz
The fixture is equipped with 3 or 5 pin cable mounted XLR for DMX input and output. The sockets are wired in parallel.
Only use a shielded twisted pair cable designed for RS-485 and 3 or 5 pin XLR plugs and connectors in order to connect
the controller with the fixture or the fixture with another.
Caution!
At the last fixture the DMX signal needs to be terminated with a terminator. Solder a
120 Ohm resistor between the (-) and the (+) signal into a 3 pin XLR plug and plug it
in to the last fixture on the signal run. Pre-manufactured terminator plugs are avail-
able for purchase from your Mega-Lite dealer (P-DMXT).
Cable (USA)
Cable (EU)
Pin
110V
Black
Brown
White
Green
Light Blue
Yellow/Green
Live
Neutral
Ground
L
N
220V
L
L
L
N
Main Power Connection
1
2
3
2
3
1
DMX—input
DMX—output
1. Shield
2. Signal (-)
3. Signal (+)
5
3
4
2
1
1
2
3
4
5
Or
Or
4. N/A
5. N/A
The occupation of the connection-cable is as follows:
Содержание outshine ww100
Страница 2: ......
