To unlink a Receiver
1.1
Press and hold the
Function
button on the
Receiver
for about 5 second until the DMX indicator flashes once and then goes off. Now the Receiver is unlinked
8
Connection
Point to Multi Point Connection
1.1
Connect the
Transceiver
to power, the DMX indicator should be flashing green.
1.2
Connect DMX signal into the
Transceiver
, the DMX indicator should be solid green.
1.3
Connect the
Receivers
to power, the DMX indicator should be off ( if the receiver connection light is not off you need to unlink your receiver)
1.4
Press and quickly release the
Function
button on the
Transceiver.
The transmitter will scan for all unlinked receivers for a period of 10 seconds– the
connection indicator on both Transmitter and Receivers will flash rapidly.
1.5
If the connection is successful the DMX indicator on the Transceiver and Receivers will be solid green on. If the connection indicator is not on Green, check
that the Receiver is in range and repeat the procedure.
Multi Point to Multi Point Connection
1.1
Connect the
First Transceiver
to power, the DMX indicator should be flashing green.
1.2
Connect DMX signal into the
First Transmitter
, the DMX indicator should be solid green.
1.3
Connect the
Receiver (s)
to power, the DMX indicator should be off ( if the receiver connection light is not off you need to unlink your receiver)
1.4
Press and quickly release the
Function
button on the
First Transceiver.
The transmitter will scan for all unlinked receivers for a period of 10 seconds– the
DMX indicator on both Transmitter and Receivers will flash rapidly.
1.5
If the connection is successful the DMX indicator on the
Transceiver
and Receiver will be green on. If the connection indicator is not on Green, check that
the Receiver is in range and repeat the procedure.
1.6
Connect the
Second Transceiver
to power, the DMX indicator should be flashing green.
1.7
Connect DMX signal into the
Second Transceiver
, the DMX indicator should be solid green.
1.8
Connect the
Receiver (s)
to power, the DMX indicator should be off ( if the receiver connection light is not off you need to unlink your receiver)
1.9
Press and quickly release the
Function
button on the
Second Transceiver.
The transmitter will scan for all unlinked receivers for a period of 10 seconds the
connection indicator on both Transmitter and Receivers will flash rapidly.
1.10
If the connection is successful the DMX indicator on the Transmitter and Receiver will be solid green on. If the connection indicator is not on Green, check
that the Receiver is in range and repeat the procedure.
1.11
You can repeat the process up to 16 Transmitters.
To unlink all Receiver
1.1
Press and hold the
Function
button on the
Transceiver
for about 5 second until the DMX indicator flashes once and then goes off. Now the Receivers are
unlinked
Point to Point Connection
1.1
Connect the
Transceiver
to power, the DMX indicator should be flashing green.
1.2
Connect DMX signal into the
Transceiver
, the DMX indicator should be solid green.
1.3
Connect the
Receiver
to power, the DMX indicator should be off ( if the receiver DMX light is not off you need to unlink your receiver)
1.4
Press and quickly release the
Function
button on the
Transceiver.
The transmitter will scan for all unlinked receiver for a period of 10 seconds– the
DMX indicator on both Transmitter and Receivers will flash rapidly.
1.5
If the connection is successful the DMX indicator on the Transceiver and Receiver will be green on. If the connection indicator is not on Green, check that
the Receiver is in range and repeat the procedure.
To make a Transceiver a Receiver
1.1
Press and hold the
Function
button on the
Transceiver whi
le you are connecting to power till DMX indicator light is lit.
To return a Receiver to original Transceiver
1.1
Press and hold the
Function
button on the
Transceiver whi
le you are connecting to power till DMX indicator light is lit.
Содержание MC2041
Страница 2: ......
