5
Caution!
1.
Do not connect fixture to a dimmer system.
2.
This fixture only operates on 110V
This fixture is equipped with a power supply that will let the unit operate from 100V to 110V
The fixture is equipped with 3 and 5 pin XLR Sockets for DMX input or output. The sockets are wired in parallel. Only
use a shielded twisted pair cable designed for RS-485 and 3 or 5 pin XLR plugs.
Caution!
At the last fixture the DMX signal needs to be terminated with a terminator. Solder a
120 Ohm resistor between the (-) and the (+) signal into a 3 or 5 pin XLR plug and
plug it in to the last fixture on the signal run. Pre-manufactured terminator plugs are
available for purchase from your Mega-Lite dealer (P-DMX-T).
Cable (USA)
Cable (EU)
Pin
110V
Black
Brown
White
Green
Light Blue
Yellow/Green
Live
Neutral
Ground
L
N
Ground
1
2
3
2
3
1
Transmitter DMX—input
Receiver DMX—output
1. Shield
2. Signal (-)
3. Signal (+)
Main Power Connection
DMX-512 Connection
5
3
4
2
1
1
2
3
4
5
Caution!
1.
Do not connect 2 input cable or 2 output cables at the same time from the input or output.
Содержание MC2041
Страница 2: ......
