5
Output Connection
Deco Driver CV4 is designed to be used as a driver for Constant Voltage lighting fixtures. There are many fixtures a
Deco Driver can control . Each of the 4 output can be individually controlled and addressed to use the same or different
fixture per each output. The Deco Lighting fixture manual will give you the information with power link limitations and
control type for that unit.
Fixtures that require Strip Cable connection will connect the input cables via 5Pin Screw terminal.
Use 20AWG cable or thicker for connections. Cables exceeding 100ft will have volt-
age drop. Voltage drop will result in intensity drop.
4 Ch Fixtures
DMX Control Mode
4 or 7CH
3 Ch Fixtures
DMX Control Mode
3 CH
2 Ch Fixtures
DMX Control Mode
2 CH
1 Ch Fixtures
DMX Control Mode
1 CH
Fixtures that require RJ45 connection will connect the input cables to RJ45 Output.
Use Cat6 A AWG 24 or thicker cable for cable connection with RJ45 connections. Ca-
bles exceeding 100ft will have voltage drop. Voltage drop will result in intensity drop.
Pin1 Red
-
Pin 2 24V+
Pin 3 Green
-
Pin 4 24V+
Pin 5 Blue
-
Pin 6 24V+
Pin 7 Warm White
-
Pin 8 24V+
4 Ch Fixtures
DMX Control Mode
4 or 7CH
Pin1 Red
-
Pin 2 24V+
Pin 3 Green
-
Pin 4 24V+
Pin 5 Blue
-
Pin 6 24V+
Pin 7 N/A
Pin 8 N/A
3 Ch Fixtures
DMX Control Mode
3 CH
Pin1 Warm White
-
Pin 2 24V+
Pin 3 Warm White
-
Pin 4 24V+
Pin 5 Cool White
-
Pin 6 24V+
Pin 7 Cool White
-
Pin 8 24V+
2 Ch Fixtures
DMX Control Mode
2 CH
Pin1 White
-
Pin 2 24V+
Pin 3 White
-
Pin 4 24V+
Pin 5 White
-
Pin 6 24V+
Pin 7 White
-
Pin 8 24V+
1 Ch Fixtures
DMX Control Mode
1 CH
