setting up your wireless system
The Megalarm wireless fi re alarm system is designed for small offi ces, shops, workshops, site cabins and temporary
buildings. It can combine up to 10 units consisting of 1 master unit and 9 slave units, either manual call points or smoke
detectors. The system is powered by batteries and requires no mains voltage supply.
step
1
your P300W unit
(One of these is also used as the master unit)
Commissioning your system requires that you make a
P300W
unit the
master
and all other components
slaves.
(Further P300W units
and /or both C300W or D300W)
stage one,
opening and closing your master P300W unit
Open your P300W unit using the black key supplied. Using the 2 pins of the key press in the 2 slots on the underside of
the unit. To close the unit simply click the lid back into place and return key to the holding slot on top of the unit
stage two,
mounting your P300W to the wall
Fix the box at maximum 1.30 metres high using the integrated spirit level. Dimensions can be found on the drawing below
0330 999 2233
www.fi redepot.co.uk
sales@fi redepot.co.uk
2
