background image

Megalarm wireless system 

General points 

The Megalarm wireless fire alarm system is designed for small offices, shops, workshops, site cabins and 
temporary buildings. It can combine up to 10 units consisting of 1 master unit and 9 stave units, either 
manual call points or smoke detectors. The system is powered by batteries and requires no mains voltage 
supply.

The master P300W can be combined with either 9 more P300Ws, C300W radio manual call points 
(MCP), radio smoke heads D300W or a combination of all 3 totalling no more than 9, plus the master. The 
instructions in this manual will enable you to commission all devices together, which when activated will 
register an alarm sound from all P300W units and D300W detectors.

Instructions for decommissioning can be found on the last page should you encounter any difficulties.
This is important should you encounter any set up issue, decommission and start the configuration process 
again.

Technical Data  
P300W master unit 

Power 

Lithium 3V battery capacity: 1300mAh, IEC standard: CR17345 for the radio module & 6LR 61 Alkaline 9 volts battery 

for sounder/beacon operation autonomy: 5 years with at least 5 minutes alarm

Installation Method 

Surface mounted

Sounder 

Integral 90db within 2 meters

Strobe Lights

 Integral high power LEDs

Dimensions 

126(W)x242(H)x75(D)mm

Colour 

White ABS

Manual Call Point

 Integral/wireless complete with 3V lithium battery

Wireless Range

 100m in open area conditions, 30-40m if being used inside a building

C300W manual call point 

Power

 Integral lithium 3V battery, capacity: 1400mAh, IEC standard: CR17345

Range

 Maximum range between manual call point and base = 100m in open area conditions

Installation

 Mounting Surface mounted

Resetting 

Key Included

Wireless Range

 100m in open area conditions, 30-40m if being used inside a building

D300W wireless smoke detector 

Power

 Lithium sealed in battery (non-replaceable)

Sounder

 Integral 85db

Test Button 

Integral

Operating Temperature

 0 ºC - 55 ºC

Radio Linking Frequency 

868 Mhz

Wireless Range

 100m in open area conditions, 30-40m if being used inside a building

Wireless interface 

(optional - not a stock item)

Power

 12V via fire alarm panel

Operating Temperature 

0 ºC - 55 ºC

Dimensions

 83(W)x83(H)x46(D)mm

Interconnection Capacity 

Smoke detectors unlimited

Wireless Range

 100m in open area conditions, 30-40m if being used inside a building

0330 999 2233

www.firedepot.co.uk

[email protected]

1

Содержание P300W








Отзывы: