7. The vehicle refused to start running after {3} unsuccessful attempts.
I. DISABLING THE REMOTE START SYSTEM:
(If installed)
This feature allows your system’s remote start unit to be temporarily disabled to prevent the vehicle from
being remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an
enclosed area. To disable the remote start, move the optional remote start enable toggle switch to the OFF
position.
LCD REMOTE CONTROL TRANSCEIVER
:
Note:
If the system is interfered by stronger radio frequency around, sources of high voltage electric power or
such Obstacles like tall buildings and so on, the transmission range may get shorter as the system
uses low out put powered frequency.
A. BATTERY REPLACEMENT:
A 1.5V type AAA Alkaline battery powers the Remote Transmitter. When the power of the battery weakens a
icon shall be displayed on the LCD screen. When the old battery is replaced to new one, there will be
beep sounds indicate the power is up.
B. THE REMORE LCD ICONS WITH FUNCTION:
Door Lock
Your vehicle doors are locked
Door Unlock
Your vehicle doors are unlocked and
the system is Disarmed
Armed Mode
Your vehicle is in armed mode
Valet Mode
All the function shall be temporarily on
hold.
Remote Transmission
You are transmitting the signal to
control unit
In – Range Indicator
Your are within the remote control
range.
Trunk/Hood Trigger
Trunk or Hood is illegally opened
(Zone 2)
Door Open Warning
Doors are illegally opened (Zone 3)
Shock Sensor Trigger
Trigger on Shock Sensor (Zone 4)
Ignition Trigger
Trigger on Ignition Switch (Zone 5)
Warn Away trigger
Trigger on Shock Sensor (Zone 1)
Low Battery
You have to replace the battery of
remote control.
Vibration Mode
Remote Control vibrates when the
system is triggered
Driver paging / Lose and Found
Someone is paging you in front of your
vehicle
Power Save Mode
Save the battery power
Engine Running
Your vehicle's engine is running
C. PROGRAM MODE FOT LCD REMOTE CONTROL TRANSCEIVER:
Transceiver Button
System Function
Remark
+
-
Switching code for 2nd / 1st Car
Operation
Press within 5 seconds
+
-
Melody / Vibration Mode
Press within 5 seconds
+
-
Power Save Mode
Press within 5 seconds
LCD screen lamp turns on for 5 seconds.
-
+
System’s Status Check
Press within 3 seconds
-
+
Clear the Flash Icon and Melody Sound
Press within 3 seconds
9
