Insert the two power cords into the sockets on the distiller.
Please make sure that both power cords have been plugged in properly
by verifying that the white lines on both power cord plugs are no longer visible,
and then plug the main power cord into the wall outlet.
So that the distiller can start its first distillation.
The RESET button is being pre-set at “On” position,
please do not press the RESET button during the first distillation.
The distiller will automatically turn off when the distillation is complete.
After every distillation, please allow the water distiller to cool down for
at least 20 minutes before removing the top in order to avoid getting burned
by the hot steam.
After the distiller has cooled down, if want to start it again, just remove the
top and then pour the water into the stainless steel tank (do not surpass the
“FULL” line). Then put the top back; place the water container under the nozzle.
Then insert the two power cords .
Lastly push the RESET button to start the distillation.
(If the distiller has not been turned on, please firmly press the RESET button
again to start the distillation).
04.
05.
06.
※
08
