6-Quart Digital Pressure Cooker | Model MCPR100A | 21
CLEANING INSTRUCTIONS
1.
Always make sure the Pressure Cooker is unplugged, depressurized and completely
cooled down before dismantling.
2.
Use a non-abrasive sponge or damp wash cloth to clean the exterior of the outer body
and the exterior surface of the pressure cooker. NEVER immerse the pressure cooker in
any liquids.
3.
Clean the upper ring with a damp sponge or wash cloth.
4.
Remove the filter (17) by pulling it vertically. To re-attach, simply align it to the protrusions
and push it down.
5.
The pressure limiting valve pops off easily by gently pulling it up. Be careful not to
damage the thin wire spring under it.
6.
Clean the lid with warm soapy water, including the rubber seal ring, pressure limiting
valve, filter, float valve and let dry thoroughly. Clean the pressure limiting valve and the
holes with a small brush to ensure smooth flow of steam during the release cycle
7.
Let parts dry completely before reassembling.
8.
Wash the inner pot with a non-abrasive sponge and allow to air dry or use a towel.
9.
It is not recommended to use any type of scouring pad that can scratch the surface of
the inner pot.
10.
Store the inner pot inside of the pressure cooker. Store the pressure cooker in a cool,
dry location.
NOTE: Any servicing required shall be performed by an authorized service representative or
from the original manufacturer or distributer.
