STEP #3
Lower Brackets
Attach the (2) lower brackets to the
frame assembly using the following:
Bolt “B” - 12mm x 1.5” (2)
“J” - 12mm steel washer (4)
“I” - 12mm hex nut (2)
Do not overtighten as this is a pivot
point of the system. Snug Tighten.
STEP #4
Upper Brackets &
Upper Extension Arms
Attach the (2) upper brackets & (2)
upper extension arms to the frame
assembly using the following:
Bolt “C” - 12mm x 3” (2)
“J” - 12mm steel washer (4)
“K” - 12mm nylon washer (4)
“I” - 12mm hex nut (2)
Do not overtighten as this is a pivot
point of the system. Snug Tighten.
STEP #5
Height Actuator to
Lower Extension Arm
Attach the height actuator to the
lower extension arm using the
following:
Bolt “A” - 16mm x 10.75” (1)
“F” - 16mm steel washer (2)
“G” - 16mm nylon washer (2)
“E” - 16mm hex nut (1)
Nylon washers go between height
actuator and lower extension arm.
Page 8
