Main Power Connection
The control board on the fixture base is your interface to
access and control all the functions on the unit. Its digital
display gives you a code view of the options and functions.
The following will explain each function and its options.
Press Up or Down to access the menu.
Control Board
Menu Up Down Enter
DMX Address
Channel Mode
Pre Programs Speed of Programs
Strobe
Red Dimmer
Green Dimmer
Blue Dimmer
White Dimmer
Sound Mode
Fan Control
001-512
4 Ch Mode
6 Ch Mode
8 Ch Mode
16 Ch Mode
01-21
01-15
01-15
001-255
001-255
001-255
001-255
Mode 0
Mode 1
Mode 2
Press
Enter
to select the DMX Start channel use the
up/down
keys to arrive to the correct number. Make sure your DMX controller and fixture share the same fixture
assign start channel to control the unit.
DMX Address
Press
Enter
to select the DMX Operating Channel mode. Different modes will give you different control over the functions of the lighting fixture, use the
up/down
keys to
select mode. Make sure your DMX controller and fixture share the same mode of operation.
Channel Mode
Channel Mode
4 Ch Mode Red, Green, Blue, White
6 Ch Mode Dimmer, Red, Green, Blue, White, Strobe
8 Ch Mode Dimmer, Red, Green, Blue, White, Strobe, Macro, Macro Speed
16 Ch Mode Center LED R,G,B,W, Middle Circle R,G,B,W, Outer Group 1
R,G,B,W, Outer Group 2 R,G,B,W
This fixture has a selection of pre-programs that are stored inside the fixture to access these programs press
Enter
use the
up/down
button to select the program (from 1
to 21) Press
Enter
to confirm. (This function will be recalled if the fixture is powered off and on) .
Pre-Programs
Press
Enter
use the
up/down
button to select the speed program (from 1 to 15). Press
Enter
to confirm. (This function will be recalled if the fixture is powered off and on)
.
Speed of Program
5
