LED Moving Head Wash 3610 MJ-1006C User Manual ver2.0
www.mjledlighting.com
6
DMX Terminator:
In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a
DMX terminator. This prevents electrical noise from disturbing and corrupting the DMX control
signals.
The DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor connected across pins
2 and 3, which is then plugged into the output socket on the last projector in the chain. The
connections are illustrated below.
Function Set:
MENU DOWN UP ENTER
Use button switch and LCD display, can set the address code and function code easily.
Check or modify lighting function settings, Press the
MENU
or
ENTER
button. LCD display panel will
display main menus. Function operation menu all have corresponding submenu . Each menu all represent the
specific functions of lamps, specific see below "operation menu" section.
Set or browse function setting of lamp, Press
UP
or
DOWN
key.
Press
ENTER
key to save your changes or to
ENTER
submenu, Press
UP
or
DOWN
can change
value(Plus or reduce number).
Operation Menu:
Menu Structure chart
Main Menu
Sub Menu
DMX Address Set(001-512)
Address
LCD Display
