Aalto Behavioral Laboratory
Operation Instruction
ME6000
9/13
NOTICE: Make sure that ME6000 is connected than turned on.
Press “Run Protocol”.
After measurement
Press stop icon after measurement.
Close window.
3 Setting up ME6000
ME6000 works with 4 AA batteries. If you want to monitor the data stream in on-line, use USB ca-
ble labeled ME6000.
(WiFi option doesn’t work in ABL). Check from the system setup that
ME6000 is detected.
In Main window select Options ->ME6000 Manager. The USB cable is connected so that the sys-
tem detects it
as COM5. Click the “presets” window; if it opens, the connection works.
4 Mobile usage
ME6000 can be used without the USB connection, so that data is stored on CF-Memory (Compact
Flash) card. Experiment settings needs to be uploaded to the ME6000 before measuring. After the
measurement, data needs to be downloaded from the device.
See instruction for mobile usage from “800411 ME6000 user manual rev101”, chapter 5.
5 Triggering
ME6000 can be triggered with TTL pulses through
“Tr/In” channel. Connect Parallel box output
signals to the ME6000 with special BNC-cable.
