Laminate Your Value
Operation
1. Connect the air compressor to
air inlet of Oil-water Separator.
2. Switch on the air compressor
to aerate.
3. Clockwise rotate the controller
to control air pressure.
4. Install the foot switch and
plug in the power.
5. Place the rolls of cold film and
paper tube to the upper and lower
rolls (film roll and release liner roll).
6. Feeding roll and finish product roll,
and measure them straightly with scale
on the rolls.
7. Using Air knob, turn left
to lift up the upper roller.
8. Peel off the liner from the film
that is above the roll, stick the
edge of liner to the backing sheet
roll with paper tube.
10
11
