MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 Storie Street Clontarf QLD 4019 Australia
www.mefe.com.au | [email protected]
Page 4
+617 3283 4536
Free AU 1800 669 006
1.4
Security Information Continued
Never start the knife sterilization unit without water!
MEFE does not take any liability for damages resulting from improper handling or non
-
compliance with the instructions of this
manual.
In case of questions regarding function, handling and spare parts delivery please contact your supplier.
2.
Preparatory Steps for Operation
2.1
Unpacking
Unpack the unit and dispose of the waste material appropriately.
2.2 Installation
When installing the Knife Sterilizer strictly observe the pertinent national regulations.
The unit must be installed by qualified persons only.
Prior to installing the unit all necessary supply and waste connections (electrical power, water, waste water) must be provided
on site.
Fasten the Knife Sterilizer with four screws at the wall of the selected place of operation in the vicinity of an electrical socket
or mains connection unit. The feeder cable is approx. 1.5m long.
The fresh water supply pipe on site must be equipped with a shut
-
off valve (ball valve).
The Knife Sterilizer itself is connected via a terminal piece (10mm).
Connect the water outlet adequately to your drain system.
Attention: In case of very fatty waste water, install an integrated fat separator on site.
The outlet pipe comes with a diameter of 25 mm.
3.
Operation Instructions
3.1
Preconditions for Safe Operation
Disregarding or omitting the instructions of this operation manual can lead to serious personal injuries.
The machine must be used solely by persons which have been made familiar by their superiors with all its functions and
modes of operation prior to handling it. Any functional irregularities must be immediately reported to the superior!
All maintenance and repair work must be carried out by qualified personnel only, which are acquainted with the operational
safety regulations.
The direct connection of the unit to the electrical mains on site as well as all maintenance work at the electrical appliances
must be carried out by correspondingly trained personnel with electro technical qualifications only.
3.2
Regular Function
The Knife Sterilizer unit is made of a double
-
walled insulated basin of stainless steel grade 304.
The water is heated electrically via a heater element as soon as the unit is connected with the electrical mains.
