MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 Storie Street Clontarf QLD 4019 Australia
www.mefe.com.au | [email protected]
Page 3
+617 3283 4536
Free AU 1800 669 006
1. Product Description
The 12L table top bowl cutter is a high performance bowl cutter mainly used for food processing fields, such as processing
different kinds of roots, stems, leaves and vegetables into pastes speedily and effectively, processing of meat and accessories
into glue and mixing different kinds of stuffing evenly.
It is the perfect machine for processing food material which needs to be cut, mixed and homogenised.
In order to use the machine effectively, we provide this manual with specifications, operation procedures and instructions.
This manual should be submitted to the qualified operators to help them get familiar with the operation and maintenance of
the machine.
1.1 Features
•
Polished Stainless Steel and high
-
speed sharp rotating blades.
•
Simple operation and easy maintenance.
•
Streamline appearance and fully enclosed box type body.
•
Black handle with screw to safely and securely bolt lid in place.
•
Good cutting efficiency, slight temperature lifting and short cutting time.
•
On
-
and
-
off switch has good waterproof properties, reliability, long service life, low noise and simple operation.
1.2 Safety
Do not
remove any components from this machine.
Do not
immerse in water.
Do not
place hands in the cutting bowl.
Machine must used in accordance with these instructions and only by persons competent to do so.
Position on a flat, stable surface.
Suitable for indoor use only.
Always switch off and disconnect power supply to the appliance when not in use.
Regularly check the screws fixing the blades to the cutting discs and tighten as necessary.
If power cord is damaged, it must be replaced by a qualified electrician to avoid hazard.
Not suitable for use by children. Keep all packaging away from children and dispose of in accordance with the local regulations
and guides.
The machine parts that come directly into contact with food are made of material strictly in accordance with the requests of
food safety and health standards, which means no rust or corrosion, ensuring it remains non
-
toxic and harmless to human
health even after using for a long time.
2. Install and Operation
Before the first operation follow these steps:
1.
Carefully unwrap the package and read the instruction manual.
2.
Inspect each component: confirm that the fasteners have not come loose in transit, switch or power cord damaged due
to transport, and that the power supply voltage and existing product voltage match.
3.
Check whether there is a foreign item inside the dish basin, if so clean up in time to avoid external impurities or dam-
age of cutting tools and other machine parts.
Place the machine in a dry and ventilated level surface to ensure the machine works smoothly and safely.
